JCP Vitrified Clay Pipe is quickly installed with a minimum of additional tools. Smaller couplings assemble easily with only a firm push or shove by hand. Larger sizes may require a pry bar or pipe puller. To obtain proper performance, bell holes must be provided for each section. Entire length of pipe barrel must be supported by unyielding bedding. It is highly recommended that bedding material be shovel sliced into the haunch of the pipe. Refer to ASTM Designation C 12; Standard Practice for Installing Vitrified Clay Pipe Lines.

		To Install Polyurethane Compression Joint:
		1. Wipe joint clean on both spigot and socket surfaces.
		2. Lubricate spigot and socket surfaces.
		3. Insert spigot end firmly into socket immediately after applying lubricant.